Can your room compete?: show your sTILE

show your sTILE

Like us on our facebok official page and join the contest.

1. Click a photograph showing floor or wall tiles,
2. Upload it on our page on the wall,
3. Tag your friends, invite them and get the most comments/likes.

Tips: Calculate how much tile you need?

Wall Tiles

Techniques for estimating how many tiles you need are to calculate the height of the wall and the height of your tiles. You can then assess how many tiles will be needed to go up the wall (count half tiles as full ones). Do the same for the width of the wall, then multiply the numbers? This will give you the number of tiles needed to tile the wall you have measured. Work your way around the room and adjust the amount for windows, doorways.

Vitrified Tiles

There are many different types of vitrified tiles available. Vitrified tiles are generally thicker and larger than wall tiles.

One of the easiest methods for estimating how many tiles you need is to measure the floor area in one direction. You can then estimate how many tiles will be needed to go across the floor (count half tiles as full ones). Do the same for the other direction of the floor and the width of the tile. Then multiply the numbers. This will give you the total number of tiles needed to tile the floor area. Purchase some extra tiles to allow for wastage.

*Always purchase your tiles in one batch and work from several boxes to achieve a good blend of shading.

Also you can click on below button.

-

Pratik Patel (B.D.M.)

Shreeji Ceramic Ind.

Morbi (INDIA)

Some basic steps to know the installation of Tiles.

Dear all,

Best selection of Tiles for your home is not making sense until you have fit it accordingly. Creation and Cleanness are the main points to be taken while installing ceramic tiles. So as far we concern, installing a Ceramic Tile is not a simple job. Those with a basic knowledge of home improvement can save a few bucks on professional installation, but those with no experience in basic construction may find it more complicated than they expected.

So before beginning any tiling project, a few steps must be taken. Most importantly, the sub floor must be checked and levelled well to ensure that there will be no imperfection under the new tile that could cause cracking later. Tile should be laid starting from the doorway out to make sure that the floor looks even when entering the room. As tiles are put into place, a level can ensure that no tile is placed higher than another. If necessary, a small block of wood with a hammer can gently press tile down when necessary. Allow the full tiles to dry overnight before walking on them if at all possible. Now, border tiles can be cut. Put a spacer by the wall and place another full tile against the spacer and offset on top of the other loose tile. Draw a line across the lower tile using the upper one as a guide. The line shows where to cut the lower tile to make it fit in the space needed against the wall. Nippers should be used for unusually shaped cuts like those around round objects. Set these pieces with adhesives just as with the full pieces and allow setting overnight once again. Next step is to remove the tile spacers and lay the grout float over the tiles at a 45`degree angle. Gently push the grout down into the spaces to be sure there are no pits. Excess grout should be wiped with a sponge and bucket. Some manufacturers may require the grout to be sprayed with water periodically while drying to prevent cracking, so be sure to check package instruction. Allow the grout to cure for a week before using a silicone sealer to protect the grout from water damage or stains.

The excellence and exhaustive fixing method is must to show your floor nit and tidy and it also presents the extra ordinary look while seeing it with very first spectacle. I found this information very useful to who doesn't know any basic ideas about tiling floor. Many of our customers purchase the very latest designed tile with great expectations but latterly they complained us that it is not up to that mark. Tiles isn’t glowing its design and quality. So I request our every client to read the basic instructions before they apply the tiles because “we understand your choice.”